Jon,
Great to "see" you. Are you sure the mark isn't one made for checking from
above (or below if you're looking from above?)
Ron Soave
> On Aug 26, 2016, at 3:55 PM, Jon Paschke via Spridgets
> <spridgets@autox.team.net> wrote:
>
> Hi
> I've just rebuilt my 1275 and it started right up and we broke in the cam
> with no problems. After shutting it down and it cooled off we put the timing
> light on it and the marks are at least 2 inches apart and when I try moving
> the distributor to get them close the motor will not run. What did I do? it
> seems like it's about a quarter of the bottom pulley off. I have the
> distributor aligned according to the book and the rotor points right at
> number one at TDC. I have a pertronics in it and it ran fine and timed right
> before the rebuild. Could the cam be off?
> Thanks in advance,
> Jon
>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/soavero@yahoo.com
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|