--===============7005498883308352407==
--001a113ce5c0ac2c6f0537aac5d5
Thanks Mark, I did lots of maintenance yesterday and stopped because I must
have lost the socket to remove the steering wheel. I have a 1 1/4" and it's
too big so it must be either 1 1/8" or 1 1/16", so I'll check at work but
I'm sure I will need to buy one or both. Then I left the little spring rod
that goes into the hole of the steering wheel on my desk at work and will
pick that up today as well. Is that horn (I'm adding hi & low together)
sandwiched between the nose body and the grill?
Lin
62 Sprite "Pinky"
On Thu, Jul 14, 2016 at 5:50 PM, Mark Haynes via Spridgets <
spridgets@autox.team.net> wrote:
> From: Linda Grunthaner <grunthaner@gmail.com>
> To: Spridget list <Spridgets@autox.team.net>
> Subject: [Spridgets] Location for horns?,
> Lin, on the MKII the horns were mounted low on the HORNS!, you know- the
> frame rails, just in front of the lower edge of the front panel that
> deflects air into the radiator on the Passenger's side (US). the wiring
> should come off of the harness just behind the front of the right fender-
> it feeds through from the engine compartment as part of the headlight and
> turn signal bundle.
>
> Mark Haynes
> It only goes one way- Pay It Forward
>
> On Thu, Jul 14, 2016 at 12:00 PM, <spridgets-request@autox.team.net>
> wrote:
>
>> Send Spridgets mailing list submissions to
>> spridgets@autox.team.net
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://autox.team.net/mailman/listinfo/spridgets
>> or, via email, send a message with subject or body 'help' to
>> spridgets-request@autox.team.net
>>
>> You can reach the person managing the list at
>> spridgets-owner@autox.team.net
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of Spridgets digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Re: Flasher Units (Linda Grunthaner)
>> 2. Location for horns?, 1962 Spridgets anyone have a photo?
>> (Linda Grunthaner)
>> 3. Re: Bonnet locating pins (Linda Grunthaner)
>> 4. Re: Location for horns?, 1962 Spridgets anyone have a photo?
>> (Brad Fornal)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Thu, 14 Jul 2016 06:41:19 -0400
>> From: Linda Grunthaner <grunthaner@gmail.com>
>> To: Bruce Hamper <brucehamper@gmail.com>
>> Cc: Spridget list <spridgets@autox.team.net>
>> Subject: Re: [Spridgets] Flasher Units
>> Message-ID:
>> <CAL0QtVff5OQ1Re=+
>> gM60XssJP-vooAv7oA76NK6xLwW7f82afQ@mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Bruce and Spridgeteers,
>> My stupid question is, what do you mean by flasher is that hazard lights?
>> I'm making sure my little 62 Spridget electrical are all sorted out and
>> nothing new like 4way flashers as my LBC is my learning tool to the
>> wonderful world of basic auto electrics....LOL.
>> Thanks Lin
>> 62 Sprite "Pinky"
>> Running well tuneup next and some body repairs.
>> My video:
>> https://youtu.be/OMgpZQXuGSk
>>
>> On Mon, Jul 4, 2016 at 12:34 PM, Bruce Hamper via Spridgets <
>> spridgets@autox.team.net> wrote:
>>
>> > Here's some interesting observations with flasher units.
>> > I recently had the flasher unit in my '69 Sprite fail. It occurred
>> during
>> > my trip back from MG2016 from Louisville to St. Louis. The lights all
>> > worked, but were on continually when using the stalk turn signal.
>> That's
>> > not much of a problem, however flipping the stalk switch on and off to
>> > mimic a flasher gets annoying!
>> > Once I got back home, I ordered up a new, correct flasher unit (8-512,
>> > square unit) from VB. I was surprised to find that it also did not
>> flash
>> > the lights - constant on when using the stalk switch. The old unit was
>> > revived briefly by putting it back in the car and tapping the side of
>> the
>> > metal can. Works just like a broken fuel pump! Turns out the new
>> square
>> > unit would not flash, even after tapping, hitting, dropping on floor,
>> etc.
>> > The new units are only rated (as noted on the metal can) to 47W max.
>> Two
>> > old style tungsten lamps (original style 1156 bulbs; 27W each) would
>> draw
>> > 54W at 13V. As expected the new square flasher got very hot while
>> engaged
>> > in the circuit. I don't see how these new units can possibly work
>> unless
>> > you have lower amperage lamps.
>> > I switched to a generic flasher unit from Riley; a DOT 522 round can
>> > flasher. It works great! Hope this saves someone on the list some
>> time.
>> > Happy 4th of July and may all your flashers work!
>> > Bruce
>> >
>> > ------------------------
>> >
>> > spridgets@autox.team.net
>> >
>> > Donate: http://www.team.net/donate.html
>> > Suggested annual donation: $12.75
>> >
>> > Archive: http://www.team.net/archive
>> > Forums: http://www.team.net/forums
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/spridgets/grunthaner@gmail.com
>> >
>> >
>>
>>
>> --
>> "Pay if forward" in honor of Frank Clarici III, Spritenut
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/spridgets/attachments/20160714/959a79ed/attachment-0001.html
>> >
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Thu, 14 Jul 2016 07:04:47 -0400
>> From: Linda Grunthaner <grunthaner@gmail.com>
>> To: Spridget list <Spridgets@autox.team.net>
>> Subject: [Spridgets] Location for horns?, 1962 Spridgets anyone have a
>> photo?
>> Message-ID:
>> <CAL0QtVd-tQ-+iAadyKgvzqmOiXbHTQ-D=
>> RbG2mdO4brw8A+Xbw@mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hi Spridgeteers,
>> I just received my new Lucas horns from eBay (Thanks Jim) and now I need
>> to
>> know where they were supposed be located originally as my PO bolted the
>> broken single horn to a jagged hole that I need to weld up. I believe the
>> 62 only had 1 horn but I wanted the hi-lo setup and I want to try and
>> place
>> it near the original location. No concourse rest here but I do want to try
>> and get my little Spridget wiring and locations close to where Donald and
>> Geoffrey wanted them LOL.
>>
>> My horn's
>>
>> http://www.ebay.com/itm/151382636843?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
>>
>> My video:
>> https://www.youtube.com/watch?v=OMgpZQXuGSk&feature=youtu.be
>>
>> Thanks Lin,
>> 62 Sprite Pinky
>>
>> PS I have an NOS horn button assembly I have not installed yet.
>> --
>> "Pay if forward" in honor of Frank Clarici III, Spritenut
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/spridgets/attachments/20160714/bd0c958b/attachment-0001.html
>> >
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Thu, 14 Jul 2016 07:09:33 -0400
>> From: Linda Grunthaner <grunthaner@gmail.com>
>> To: Richard Ball <rich_ball@mindspring.com>
>> Cc: Spridget list <spridgets@autox.team.net>, Jeff Kelly
>> <jeffsbugeye@gmail.com>
>> Subject: Re: [Spridgets] Bonnet locating pins
>> Message-ID:
>> <CAL0QtVftd9AGD2-ZT6SqBh13B4=
>> jfNP74-dpRj+3N3O6OH7JEw@mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Interesting Rich, I made a video of Holy Sprite during assembly which I'll
>> look for and maybe post on youtube or Vimo for the list. I would like to
>> see a photo of that roll pin assembly that Frank made if anyone has one.
>> Lin
>>
>> 62 Sprite "Pinky"
>>
>>
>> On Wed, Jul 13, 2016 at 2:56 AM, Richard Ball via Spridgets <
>> spridgets@autox.team.net> wrote:
>>
>> > Michael,
>> >
>> >
>> >
>> > Is this on the Holy Sprite? I have heard that Frank used to drill holes
>> > in the hinge mounting flange and drive in roll pins to help make
>> locating
>> > the hood/bonnet quicker and easier when it was needed to be removed. I
>> > wonder if that is what you?re dealing with.
>> >
>> >
>> >
>> > Rich Ball
>> >
>> > ?76 Midget
>> >
>> > Everett, WA
>> >
>> >
>> > ------------------------------
>> >
>> > *From:* Spridgets [mailto:spridgets-bounces@autox.team.net] *On Behalf
>> Of
>> > *jeffsbugeye@gmail.com via Spridgets
>> > *Sent:* Tuesday, July 12, 2016 6:57 AM
>> > *To:* spridgets@autox.team.net
>> > *Subject:* Re: [Spridgets] Bonnet locating pins
>> >
>> >
>> >
>> > My BE does not have locating pins for the hinges. ????
>> >
>> >
>> >
>> > Sent from my Verizon 4G LTE Smartphone
>> >
>> >
>> >
>> > ------ Original message------
>> >
>> > *From: *mdrowe via Spridgets
>> >
>> > *Date: *Tue, Jul 12, 2016 3:01 AM
>> >
>> > *To: *Spridgets@autox.team.net;
>> >
>> > *Subject:*[Spridgets] Bonnet locating pins
>> >
>> >
>> >
>> > blockquote.cite { margin-left: 5px; margin-right: 0px; padding-left:
>> > 10px; padding-right:0px; border-left: 1px solid #cccccc }blockquote.ci
>> > <http://blockquote.c%0d%0a%20i>te2 {margin-left: 5px; margin-right:
>> 0px;
>> > padding-left: 10px; padding-right:0px; border-left: 1px solid #cccccc;
>> > margin-top: 3px; padding-top: 0px; }.plain pre, .plain tt { font-family:
>> > monospace; font-size: 100%; font-weight: normal; font-style: normal;}a
>> img
>> > { border: 0px; }body {font-family: Tahoma;font-size: 12pt;}.plain pre,
>> > .plain tt {font-family: Tahoma;font-size: 12pt;}
>> >
>> > We had an awful time getting the bonnet locating pins in the tiny holes
>> on
>> > the hinges, even with four people, but they finally dropped in. Now
>> one
>> > side of the bonnet is too far forward, and it feels like the pins are
>> > preventing the necessary adjustment. I don't remember if it was that
>> way
>> > before. I suspect that a lot of bonnets have long since lost those
>> pins to
>> > bending, anyway.
>> >
>> >
>> >
>> > Any thoughts on the value of those pins for a well-aged bonnet?
>> >
>> >
>> >
>> > Mic hael Rowe
>> >
>> > The Holy Sprite
>> >
>> > ------------------------
>> >
>> > spridgets@autox.team.net
>> >
>> > Donate: http://www.team.net/donate.html
>> > Suggested annual donation: $12.75
>> >
>> > Archive: http://www.team.net/archive
>> > Forums: http://www.team.net/forums
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/spridgets/grunthaner@gmail.com
>> >
>> >
>>
>>
>> --
>> "Pay if forward" in honor of Frank Clarici III, Spritenut
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/spridgets/attachments/20160714/1099a9da/attachment-0001.html
>> >
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Thu, 14 Jul 2016 12:32:01 -0500
>> From: Brad Fornal <tequila.brad@gmail.com>
>> To: Linda Grunthaner <grunthaner@gmail.com>
>> Cc: Spridget list <Spridgets@autox.team.net>
>> Subject: Re: [Spridgets] Location for horns?, 1962 Spridgets anyone
>> have a photo?
>> Message-ID:
>> <CABQj3r_juWEhngE6Xc2JXBh6SA+EuEktu+M=
>> M8opJd0uwssRag@mail.gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> In our 68, they are located in the dropped down section, behind the grill.
>> There are holes already there
>>
>> On Thu, Jul 14, 2016 at 6:04 AM, Linda Grunthaner via Spridgets <
>> spridgets@autox.team.net> wrote:
>>
>> > Hi Spridgeteers,
>> > I just received my new Lucas horns from eBay (Thanks Jim) and now I need
>> > to know where they were supposed be located originally as my PO bolted
>> the
>> > broken single horn to a jagged hole that I need to weld up. I believe
>> the
>> > 62 only had 1 horn but I wanted the hi-lo setup and I want to try and
>> place
>> > it near the original location. No concourse rest here but I do want to
>> try
>> > and get my little Spridget wiring and locations close to where Donald
>> and
>> > Geoffrey wanted them LOL.
>> >
>> > My horn's
>> >
>> >
>> http://www.ebay.com/itm/151382636843?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
>> >
>> > My video:
>> > https://www.youtube.com/watch?v=OMgpZQXuGSk&feature=youtu.be
>> >
>> > Thanks Lin,
>> > 62 Sprite Pinky
>> >
>> > PS I have an NOS horn button assembly I have not installed yet.
>> > --
>> > "Pay if forward" in honor of Frank Clarici III, Spritenut
>> >
>> > ------------------------
>> >
>> > spridgets@autox.team.net
>> >
>> > Donate: http://www.team.net/donate.html
>> > Suggested annual donation: $12.75
>> >
>> > Archive: http://www.team.net/archive
>> > Forums: http://www.team.net/forums
>> > Unsubscribe/Manage:
>> > http://autox.team.net/mailman/options/spridgets/tequila.brad@gmail.com
>> >
>> >
>>
>>
>> --
>> DON JULIO 1942
>>
>> http://tequilabrad.com/
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <
>> http://autox.team.net/pipermail/spridgets/attachments/20160714/3cbd6a8a/attachment-0001.html
>> >
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> _______________________________________________
>>
>> Spridgets mailing list
>> Spridgets@autox.team.net
>> http://autox.team.net/mailman/listinfo/spridgets
>>
>>
>> ------------------------------
>>
>> End of Spridgets Digest, Vol 64, Issue 11
>> *****************************************
>>
>
>
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/grunthaner@gmail.com
>
>
--
"Pay if forward" in honor of Frank Clarici III, Spritenut
--001a113ce5c0ac2c6f0537aac5d5
Content-Transfer-Encoding: quoted-printable
<div dir=3D"ltr">Thanks Mark, I did lots of maintenance yesterday and stopp=
ed because I must have lost the socket to remove the steering wheel. I have=
a 1 1/4" and it's too big so it must be either 1 1/8" or 1 1=
/16", so I'll check at work but I'm sure I will need to buy on=
e or both. Then I left the little spring rod that goes into the hole of the=
steering wheel on my desk at work and will pick that up today as well. Is =
that horn (I'm adding hi & low together) sandwiched between the nos=
e body and the grill?<div><div>Lin</div><div>62 Sprite "Pinky"</d=
iv></div></div><div class=3D"gmail_extra"><br><div class=3D"gmail_quote">On=
Thu, Jul 14, 2016 at 5:50 PM, Mark Haynes via Spridgets <span dir=3D"ltr">=
<<a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets=
@autox.team.net</a>></span> wrote:<br><blockquote class=3D"gmail_quote" =
style=3D"margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><di=
v dir=3D"ltr"><div>From: Linda Grunthaner <<a href=3D"mailto:grunthaner@=
gmail.com" target=3D"_blank">grunthaner@gmail.com</a>><br>
To: Spridget list <<a href=3D"mailto:Spridgets@autox.team.net"; target=3D=
"_blank">Spridgets@autox.team.net</a>><br>
Subject: [Spridgets] Location for horns?, <br></div>Lin, on the MKII the ho=
rns were mounted low on the HORNS!, you know- the frame rails, just in fron=
t of the lower edge of the front panel that deflects air into the radiator =
on the Passenger's side (US). the wiring should come off of the harness=
just behind the front of the right fender- it feeds through from the engin=
e compartment as part of the headlight and turn signal bundle.<br></div><di=
v class=3D"gmail_extra"><br clear=3D"all"><div><div data-smartmail=3D"gmail=
_signature"><div dir=3D"ltr"><div>Mark Haynes<br></div>It only goes one way=
- Pay It Forward<br></div></div></div>
<br><div class=3D"gmail_quote">On Thu, Jul 14, 2016 at 12:00 PM, <span dir=
=3D"ltr"><<a href=3D"mailto:spridgets-request@autox.team.net"; target=3D"=
_blank">spridgets-request@autox.team.net</a>></span> wrote:<br><blockquo=
te class=3D"gmail_quote" style=3D"margin:0 0 0 .8ex;border-left:1px #ccc so=
lid;padding-left:1ex">Send Spridgets mailing list submissions to<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <a href=3D"mailto:spridgets@autox.team.net"; tar=
get=3D"_blank">spridgets@autox.team.net</a><br>
<br>
To subscribe or unsubscribe via the World Wide Web, visit<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <a href=3D"http://autox.team.net/mailman/listin=
fo/spridgets" rel=3D"noreferrer" target=3D"_blank">http://autox.team.net/ma=
ilman/listinfo/spridgets</a><br>
or, via email, send a message with subject or body 'help' to<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <a href=3D"mailto:spridgets-request@autox.team.=
net" target=3D"_blank">spridgets-request@autox.team.net</a><br>
<br>
You can reach the person managing the list at<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <a href=3D"mailto:spridgets-owner@autox.team.ne=
t" target=3D"_blank">spridgets-owner@autox.team.net</a><br>
<br>
When replying, please edit your Subject line so it is more specific<br>
than "Re: Contents of Spridgets digest..."<br>
<br>
<br>
Today's Topics:<br>
<br>
=C2=A0 =C2=A01. Re: Flasher Units (Linda Grunthaner)<br>
=C2=A0 =C2=A02. Location for horns?, 1962 Spridgets anyone have a photo?<br=
>
=C2=A0 =C2=A0 =C2=A0 (Linda Grunthaner)<br>
=C2=A0 =C2=A03. Re: Bonnet locating pins (Linda Grunthaner)<br>
=C2=A0 =C2=A04. Re: Location for horns?,=C2=A0 1962 Spridgets anyone have a=
photo?<br>
=C2=A0 =C2=A0 =C2=A0 (Brad Fornal)<br>
<br>
<br>
----------------------------------------------------------------------<br>
<br>
Message: 1<br>
Date: Thu, 14 Jul 2016 06:41:19 -0400<br>
From: Linda Grunthaner <<a href=3D"mailto:grunthaner@gmail.com"; target=
=3D"_blank">grunthaner@gmail.com</a>><br>
To: Bruce Hamper <<a href=3D"mailto:brucehamper@gmail.com"; target=3D"_bl=
ank">brucehamper@gmail.com</a>><br>
Cc: Spridget list <<a href=3D"mailto:spridgets@autox.team.net"; target=3D=
"_blank">spridgets@autox.team.net</a>><br>
Subject: Re: [Spridgets] Flasher Units<br>
Message-ID:<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <CAL0QtVff5OQ1Re=3D+<a href=3D"mailto:gM60Xs=
sJP-vooAv7oA76NK6xLwW7f82afQ@mail.gmail.com" target=3D"_blank">gM60XssJP-vo=
oAv7oA76NK6xLwW7f82afQ@mail.gmail.com</a>><br>
<br>
Hi Bruce and Spridgeteers,<br>
My stupid question is, what do you mean by flasher is that hazard lights?<b=
r>
I'm making sure my little 62 Spridget electrical are all sorted out and=
<br>
nothing new like 4way flashers as my LBC is my learning tool to the<br>
wonderful world of basic auto electrics....LOL.<br>
Thanks Lin<br>
62 Sprite "Pinky"<br>
Running well tuneup next and some body repairs.<br>
My video:<br>
<a href=3D"https://youtu.be/OMgpZQXuGSk"; rel=3D"noreferrer" target=3D"_blan=
k">https://youtu.be/OMgpZQXuGSk</a><br>
<br>
On Mon, Jul 4, 2016 at 12:34 PM, Bruce Hamper via Spridgets <<br>
<a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets@aut=
ox.team.net</a>> wrote:<br>
<br>
> Here's some interesting observations with flasher units.<br>
> I recently had the flasher unit in my '69 Sprite fail. It occurred=
during<br>
> my trip back from MG2016 from Louisville to St. Louis.=C2=A0 The light=
s all<br>
> worked, but were on continually when using the stalk turn signal.=C2=
=A0 That's<br>
> not much of a problem, however flipping the stalk switch on and off to=
<br>
> mimic a flasher gets annoying!<br>
> Once I got back home, I ordered up a new, correct flasher unit (8-512,=
<br>
> square unit) from VB.=C2=A0 I was surprised to find that it also did n=
ot flash<br>
> the lights - constant on when using the stalk switch.=C2=A0 The old un=
it was<br>
> revived briefly by putting it back in the car and tapping the side of =
the<br>
> metal can.=C2=A0 Works just like a broken fuel pump!=C2=A0 Turns out t=
he new square<br>
> unit would not flash, even after tapping, hitting, dropping on floor, =
etc.<br>
> The new units are only rated (as noted on the metal can) to 47W max.=
=C2=A0 Two<br>
> old style tungsten lamps (original style 1156 bulbs; 27W each) would d=
raw<br>
> 54W at 13V.=C2=A0 As expected the new square flasher got very hot whil=
e engaged<br>
> in the circuit.=C2=A0 I don't see how these new units can possibly=
work unless<br>
> you have lower amperage lamps.<br>
> I switched to a generic flasher unit from Riley; a DOT 522 round can<b=
r>
> flasher.=C2=A0 It works great!=C2=A0 Hope this saves someone on the li=
st some time.<br>
> Happy 4th of July and may all your flashers work!<br>
> Bruce<br>
><br>
> ------------------------<br>
><br>
> <a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridget=
s@autox.team.net</a><br>
><br>
> Donate: <a href=3D"http://www.team.net/donate.html"; rel=3D"noreferrer"=
target=3D"_blank">http://www.team.net/donate.html</a><br>
> Suggested annual donation: $12.75<br>
><br>
> Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" ta=
rget=3D"_blank">http://www.team.net/archive</a><br>
> Forums: <a href=3D"http://www.team.net/forums"; rel=3D"noreferrer" targ=
et=3D"_blank">http://www.team.net/forums</a><br>
> Unsubscribe/Manage:<br>
> <a href=3D"http://autox.team.net/mailman/options/spridgets/grunthaner@=
gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team.net/mailm=
an/options/spridgets/grunthaner@gmail.com</a><br>
><br>
><br>
<br>
<br>
--<br>
"Pay if forward" in honor of Frank Clarici III, Spritenut<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href=3D"http://autox.team.net/pipermail/spridgets/attachments/2=
0160714/959a79ed/attachment-0001.html" rel=3D"noreferrer" target=3D"_blank"=
>http://autox.team.net/pipermail/spridgets/attachments/20160714/959a79ed/at=
tachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 2<br>
Date: Thu, 14 Jul 2016 07:04:47 -0400<br>
From: Linda Grunthaner <<a href=3D"mailto:grunthaner@gmail.com"; target=
=3D"_blank">grunthaner@gmail.com</a>><br>
To: Spridget list <<a href=3D"mailto:Spridgets@autox.team.net"; target=3D=
"_blank">Spridgets@autox.team.net</a>><br>
Subject: [Spridgets] Location for horns?, 1962 Spridgets anyone have a<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 photo?<br>
Message-ID:<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <CAL0QtVd-tQ-+iAadyKgvzqmOiXbHTQ-D=3D<a href=
=3D"mailto:RbG2mdO4brw8A%2BXbw@mail.gmail.com"; target=3D"_blank">RbG2mdO4br=
w8A+Xbw@mail.gmail.com</a>><br>
<br>
Hi Spridgeteers,<br>
I just received my new Lucas horns from eBay (Thanks Jim) and now I need to=
<br>
know where they were supposed be located originally as my PO bolted the<br>
broken single horn to a jagged hole that I need to weld up. I believe the<b=
r>
62 only had 1 horn but I wanted the hi-lo setup and I want to try and place=
<br>
it near the original location. No concourse rest here but I do want to try<=
br>
and get my little Spridget wiring and locations close to where Donald and<b=
r>
Geoffrey wanted them LOL.<br>
<br>
My horn's<br>
<a href=3D"http://www.ebay.com/itm/151382636843?_trksid=3Dp2055119.m1438.l2=
649&ssPageName=3DSTRK%3AMEBIDX%3AIT" rel=3D"noreferrer" target=3D"_blan=
k">http://www.ebay.com/itm/151382636843?_trksid=3Dp2055119.m1438.l2649&=
ssPageName=3DSTRK%3AMEBIDX%3AIT</a><br>
<br>
My video:<br>
<a href=3D"https://www.youtube.com/watch?v=3DOMgpZQXuGSk&feature=3Dyout=
u.be" rel=3D"noreferrer" target=3D"_blank">https://www.youtube.com/watch?v=
=3DOMgpZQXuGSk&feature=3Dyoutu.be</a><br>
<br>
Thanks Lin,<br>
62 Sprite Pinky<br>
<br>
PS I have an NOS horn button assembly I have not installed yet.<br>
--<br>
"Pay if forward" in honor of Frank Clarici III, Spritenut<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href=3D"http://autox.team.net/pipermail/spridgets/attachments/2=
0160714/bd0c958b/attachment-0001.html" rel=3D"noreferrer" target=3D"_blank"=
>http://autox.team.net/pipermail/spridgets/attachments/20160714/bd0c958b/at=
tachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 3<br>
Date: Thu, 14 Jul 2016 07:09:33 -0400<br>
From: Linda Grunthaner <<a href=3D"mailto:grunthaner@gmail.com"; target=
=3D"_blank">grunthaner@gmail.com</a>><br>
To: Richard Ball <<a href=3D"mailto:rich_ball@mindspring.com"; target=3D"=
_blank">rich_ball@mindspring.com</a>><br>
Cc: Spridget list <<a href=3D"mailto:spridgets@autox.team.net"; target=3D=
"_blank">spridgets@autox.team.net</a>>, Jeff Kelly<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <<a href=3D"mailto:jeffsbugeye@gmail.com"; ta=
rget=3D"_blank">jeffsbugeye@gmail.com</a>><br>
Subject: Re: [Spridgets] Bonnet locating pins<br>
Message-ID:<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <CAL0QtVftd9AGD2-ZT6SqBh13B4=3D<a href=3D"ma=
ilto:jfNP74-dpRj%2B3N3O6OH7JEw@mail.gmail.com" target=3D"_blank">jfNP74-dpR=
j+3N3O6OH7JEw@mail.gmail.com</a>><br>
<br>
Interesting Rich, I made a video of Holy Sprite during assembly which I'=
;ll<br>
look for and maybe post on youtube or Vimo for the list. I would like to<br=
>
see a photo of that roll pin assembly that Frank made if anyone has one.<br=
>
Lin<br>
<br>
62 Sprite "Pinky"<br>
<br>
<br>
On Wed, Jul 13, 2016 at 2:56 AM, Richard Ball via Spridgets <<br>
<a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets@aut=
ox.team.net</a>> wrote:<br>
<br>
> Michael,<br>
><br>
><br>
><br>
> Is this on the Holy Sprite?=C2=A0 I have heard that Frank used to dril=
l holes<br>
> in the hinge mounting flange and drive in roll pins to help make locat=
ing<br>
> the hood/bonnet quicker and easier when it was needed to be removed.=
=C2=A0 I<br>
> wonder if that is what you?re dealing with.<br>
><br>
><br>
><br>
> Rich Ball<br>
><br>
> ?76 Midget<br>
><br>
> Everett, WA<br>
><br>
><br>
> ------------------------------<br>
><br>
> *From:* Spridgets [mailto:<a href=3D"mailto:spridgets-bounces@autox.te=
am.net" target=3D"_blank">spridgets-bounces@autox.team.net</a>] *On Behalf =
Of<br>
> *<a href=3D"mailto:jeffsbugeye@gmail.com"; target=3D"_blank">jeffsbugey=
e@gmail.com</a> via Spridgets<br>
> *Sent:* Tuesday, July 12, 2016 6:57 AM<br>
> *To:* <a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">sp=
ridgets@autox.team.net</a><br>
> *Subject:* Re: [Spridgets] Bonnet locating pins<br>
><br>
><br>
><br>
> My BE does not have locating pins for the hinges.=C2=A0 ????<br>
><br>
><br>
><br>
> Sent from my Verizon 4G LTE Smartphone<br>
><br>
><br>
><br>
> ------ Original message------<br>
><br>
> *From: *mdrowe via Spridgets<br>
><br>
> *Date: *Tue, Jul 12, 2016 3:01 AM<br>
><br>
> *To: *<a href=3D"mailto:Spridgets@autox.team.net"; target=3D"_blank">Sp=
ridgets@autox.team.net</a>;<br>
><br>
> *Subject:*[Spridgets] Bonnet locating pins<br>
><br>
><br>
><br>
> blockquote.cite { margin-left: 5px; margin-right: 0px; padding-left:<b=
r>
> 10px; padding-right:0px; border-left: 1px solid #cccccc }<a href=3D"ht=
tp://blockquote.ci" rel=3D"noreferrer" target=3D"_blank">blockquote.ci</a><=
br>
> <<a href=3D"http://blockquote.c"; rel=3D"noreferrer" target=3D"_blan=
k">http://blockquote.c</a>%0d%0a%20i>te2 {margin-left: 5px; margin-right=
: 0px;<br>
> padding-left: 10px; padding-right:0px; border-left: 1px solid #cccccc;=
<br>
> margin-top: 3px; padding-top: 0px; }.plain pre, .plain tt { font-famil=
y:<br>
> monospace; font-size: 100%; font-weight: normal; font-style: normal;}a=
img<br>
> { border: 0px; }body {font-family: Tahoma;font-size: 12pt;}.plain pre,=
<br>
> .plain tt {font-family: Tahoma;font-size: 12pt;}<br>
><br>
> We had an awful time getting the bonnet locating pins in the tiny hole=
s on<br>
> the hinges, even with four people,=C2=A0 but they finally dropped in.=
=C2=A0 Now one<br>
> side of the bonnet is too far forward, and it feels like the pins are<=
br>
> preventing the necessary adjustment.=C2=A0 I don't remember if it =
was that way<br>
> before.=C2=A0 I suspect that a lot of bonnets have long since lost tho=
se pins to<br>
> bending, anyway.<br>
><br>
><br>
><br>
> Any thoughts on the value of those pins for a well-aged bonnet?<br>
><br>
><br>
><br>
> Mic hael Rowe<br>
><br>
> The Holy Sprite<br>
><br>
> ------------------------<br>
><br>
> <a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridget=
s@autox.team.net</a><br>
><br>
> Donate: <a href=3D"http://www.team.net/donate.html"; rel=3D"noreferrer"=
target=3D"_blank">http://www.team.net/donate.html</a><br>
> Suggested annual donation: $12.75<br>
><br>
> Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" ta=
rget=3D"_blank">http://www.team.net/archive</a><br>
> Forums: <a href=3D"http://www.team.net/forums"; rel=3D"noreferrer" targ=
et=3D"_blank">http://www.team.net/forums</a><br>
> Unsubscribe/Manage:<br>
> <a href=3D"http://autox.team.net/mailman/options/spridgets/grunthaner@=
gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team.net/mailm=
an/options/spridgets/grunthaner@gmail.com</a><br>
><br>
><br>
<br>
<br>
--<br>
"Pay if forward" in honor of Frank Clarici III, Spritenut<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href=3D"http://autox.team.net/pipermail/spridgets/attachments/2=
0160714/1099a9da/attachment-0001.html" rel=3D"noreferrer" target=3D"_blank"=
>http://autox.team.net/pipermail/spridgets/attachments/20160714/1099a9da/at=
tachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Message: 4<br>
Date: Thu, 14 Jul 2016 12:32:01 -0500<br>
From: Brad Fornal <<a href=3D"mailto:tequila.brad@gmail.com"; target=3D"_=
blank">tequila.brad@gmail.com</a>><br>
To: Linda Grunthaner <<a href=3D"mailto:grunthaner@gmail.com"; target=3D"=
_blank">grunthaner@gmail.com</a>><br>
Cc: Spridget list <<a href=3D"mailto:Spridgets@autox.team.net"; target=3D=
"_blank">Spridgets@autox.team.net</a>><br>
Subject: Re: [Spridgets] Location for horns?,=C2=A0 =C2=A01962 Spridgets an=
yone<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 have a photo?<br>
Message-ID:<br>
=C2=A0 =C2=A0 =C2=A0 =C2=A0 <CABQj3r_juWEhngE6Xc2JXBh6SA+EuEktu+M=3D<a h=
ref=3D"mailto:M8opJd0uwssRag@mail.gmail.com"; target=3D"_blank">M8opJd0uwssR=
ag@mail.gmail.com</a>><br>
<br>
In our 68, they are located in the dropped down section, behind the grill.<=
br>
There are holes already there<br>
<br>
On Thu, Jul 14, 2016 at 6:04 AM, Linda Grunthaner via Spridgets <<br>
<a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridgets@aut=
ox.team.net</a>> wrote:<br>
<br>
> Hi Spridgeteers,<br>
> I just received my new Lucas horns from eBay (Thanks Jim) and now I ne=
ed<br>
> to know where they were supposed be located originally as my PO bolted=
the<br>
> broken single horn to a jagged hole that I need to weld up. I believe =
the<br>
> 62 only had 1 horn but I wanted the hi-lo setup and I want to try and =
place<br>
> it near the original location. No concourse rest here but I do want to=
try<br>
> and get my little Spridget wiring and locations close to where Donald =
and<br>
> Geoffrey wanted them LOL.<br>
><br>
> My horn's<br>
><br>
> <a href=3D"http://www.ebay.com/itm/151382636843?_trksid=3Dp2055119.m14=
38.l2649&ssPageName=3DSTRK%3AMEBIDX%3AIT" rel=3D"noreferrer" target=3D"=
_blank">http://www.ebay.com/itm/151382636843?_trksid=3Dp2055119.m1438.l2649=
&ssPageName=3DSTRK%3AMEBIDX%3AIT</a><br>
><br>
> My video:<br>
> <a href=3D"https://www.youtube.com/watch?v=3DOMgpZQXuGSk&feature=
=3Dyoutu.be" rel=3D"noreferrer" target=3D"_blank">https://www.youtube.com/w=
atch?v=3DOMgpZQXuGSk&feature=3Dyoutu.be</a><br>
><br>
> Thanks Lin,<br>
> 62 Sprite Pinky<br>
><br>
> PS I have an NOS horn button assembly I have not installed yet.<br>
> --<br>
> "Pay if forward" in honor of Frank Clarici III, Spritenut<br=
>
><br>
> ------------------------<br>
><br>
> <a href=3D"mailto:spridgets@autox.team.net"; target=3D"_blank">spridget=
s@autox.team.net</a><br>
><br>
> Donate: <a href=3D"http://www.team.net/donate.html"; rel=3D"noreferrer"=
target=3D"_blank">http://www.team.net/donate.html</a><br>
> Suggested annual donation: $12.75<br>
><br>
> Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" ta=
rget=3D"_blank">http://www.team.net/archive</a><br>
> Forums: <a href=3D"http://www.team.net/forums"; rel=3D"noreferrer" targ=
et=3D"_blank">http://www.team.net/forums</a><br>
> Unsubscribe/Manage:<br>
> <a href=3D"http://autox.team.net/mailman/options/spridgets/tequila.bra=
d@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox.team.net/mai=
lman/options/spridgets/tequila.brad@gmail.com</a><br>
><br>
><br>
<br>
<br>
--<br>
DON JULIO 1942<br>
<br>
<a href=3D"http://tequilabrad.com/"; rel=3D"noreferrer" target=3D"_blank">ht=
tp://tequilabrad.com/</a><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href=3D"http://autox.team.net/pipermail/spridgets/attachments/2=
0160714/3cbd6a8a/attachment-0001.html" rel=3D"noreferrer" target=3D"_blank"=
>http://autox.team.net/pipermail/spridgets/attachments/20160714/3cbd6a8a/at=
tachment-0001.html</a>><br>
<br>
------------------------------<br>
<br>
Subject: Digest Footer<br>
<br>
_______________________________________________<br>
<br>
Spridgets mailing list<br>
<a href=3D"mailto:Spridgets@autox.team.net"; target=3D"_blank">Spridgets@aut=
ox.team.net</a><br>
<a href=3D"http://autox.team.net/mailman/listinfo/spridgets"; rel=3D"norefer=
rer" target=3D"_blank">http://autox.team.net/mailman/listinfo/spridgets</a>=
<br>
<br>
<br>
------------------------------<br>
<br>
End of Spridgets Digest, Vol 64, Issue 11<br>
*****************************************<br>
</blockquote></div><br></div>
<br>------------------------<br>
<br>
<a href=3D"mailto:spridgets@autox.team.net";>spridgets@autox.team.net</a><br=
>
<br>
et=3D"_blank">http://www.team.net/donate.html</a><br>
<br>
Archive: <a href=3D"http://www.team.net/archive"; rel=3D"noreferrer" target=
=3D"_blank">http://www.team.net/archive</a><br>
Forums: <a href=3D"http://www.team.net/forums"; rel=3D"noreferrer" target=3D=
"_blank">http://www.team.net/forums</a><br>
ets/grunthaner@gmail.com" rel=3D"noreferrer" target=3D"_blank">http://autox=
.team.net/mailman/options/spridgets/grunthaner@gmail.com</a><br>
<br></blockquote></div><br><br clear=3D"all"><div><br></div>-- <br><div cla=
ss=3D"gmail_signature" data-smartmail=3D"gmail_signature"><div dir=3D"ltr">=
<span style=3D"font-size:small">"Pay if forward" in honor of Fran=
k Clarici III, Spritenut</span><br></div></div>
</div>
--001a113ce5c0ac2c6f0537aac5d5--
--===============7005498883308352407==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
--===============7005498883308352407==--
|