Thanks for the info, much appreciated.
Regards,
Martyn
On 2/8/2013 9:13 PM, 60bugeye@cebridge.net wrote:
> That is exactly who it was and I did the same deal with b samplesb
>
> lEO
>
> From: Michael MacLean
> Sent: Friday, February 08, 2013 3:58 PM
> To: Jay ; spridgets@autox.team.net ; 60bugeye@cebridge.net
> Subject: Re: [Spridgets] Seats
>
> Maybe the one you are thinking of is Hanson Rivet. I used them also
> for
> my valve cover plates. They usually sell in the 100s or thousands of rivets,
> but the salesman told me if I bought a bucking tool (10 bucks or so) he would
> send me a dozen "samples" of different sizes close to what I needed. That was
> ten years ago. I still have the tool and more rivets than I will need for the
> BN2 I am doing.
> Mike MacLean
> 60 Sprite
> 56 BN2
>
> www.hansonrivet.com
>
> --- On Fri, 2/8/13, 60bugeye@cebridge.net <60bugeye@cebridge.net>
> wrote:
>
>
> From: 60bugeye@cebridge.net <60bugeye@cebridge.net>
> Subject: Re: [Spridgets] Seats
> To: "Jay" <jfishbein@snet.net>, spridgets@autox.team.net
> Date: Friday, February 8, 2013, 6:59 PM
>
>
> There is a supplier of rivets in California I got mine from along
> with
> the rivets for the valve cover and other parts that needed to be riveted. I
> will find one of the packages this evening and post it.
>
> Leo
>
> -----Original Message----- From: Jay
> Sent: Friday, February 08, 2013 9:42 AM
> To: wlmailhtml:/mc/compose?to=spridgets@autox.team.net
> Subject: Re: [Spridgets] Seats
>
> What about an industrial supplier such as McMaster-Carr?
>
> "Moss (US&UK) to do not show them"
>
> Shocking.
>
> A quick Google search:
>
> http://www.mcmaster.com/#rivets/=le1mi4
>
>
> And there are other suppliers.
>
> http://www1.mscdirect.com/eCommerce/NavigationServlet/Fasteners-Adhes
> ives/Rivets-Threaded-Inserts-Tools/Rivets-Threaded-Inserts-Sheet-Metal-Fasten
> ers/_/N-77dvt
>
>
> http://www.bigflatsrivet.com/steel_rivets.html
>
> jay
>
>
>
>
> ________________________________
> From: Martyn Ridley <wlmailhtml:/mc/compose?to=ridleymj@brant.net>
> To: wlmailhtml:/mc/compose?to=spridgets@autox.team.net
> Sent: Fri, February 8, 2013 10:37:18 AM
> Subject: [Spridgets] Seats
>
> Does anybody know where you can get the rivets used to hold the seat
> frame to
> the track. Moss (US&UK) to do not show them, nor does the parts
> manual. Nut
> and bolt foul the seat base or the track itself.
> ------------------------
>
> wlmailhtml:/mc/compose?to=spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/60bugeye@cebridge.net
> ------------------------
>
> wlmailhtml:/mc/compose?to=spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/rrengineer.mike@att.net
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/ridleymj@brant.net
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|