Howard,
Are you talking about the inner fulcrum pins? At the inboard end of
each A-arm?
If so, I have had to cut them off with a reciprocating saw on several
occasions. Heating them usually only melts the bushings and they are
still stuck to the metal portion of the bushings which will not pass
thru the holes in the A-arm. Spraying them with liberal amounts of
PB Blaster or Liquid wrench sometimes helps......
Kevin
Kevin
On Jan 1, 2012, at 9:57 PM, Miniac7 at aol.com wrote:
> In dismantling my Bugeye front end today I was able to remove both
> of the
> A-arm fulcrum pins from the right side, although it took
> significant blows
> with a BFH to do so. The left side however is a different animal.
> What's
> the suggested method of removing these pins when they don't want to
> budge?
> They turn freely but I cannot drive them out. HELP !!!
|