You should do the A-arm bushings too. They will be as beat out as the
trunnion bushing. ...bill in corvallis
===================================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Rick Bastedo
Sent: Saturday, August 13, 2011 7:41 PM
To: Brad Fornal
Cc: SPRIDGETS
Subject: [Spridgets] HELP PLEASE - was: front bushing replacement
FIASCO
It's pretty badly screwed now, the passenger side trunnion bushing was
mostly non existent and what was there didn't look at all correct.
I put in the correct pair of bushings and put things back together, did the
same on the drivers side but over there what I took out resembled what I was
putting back in, with a bit of wear, but they were correct.
Things didn't look right so I decided to just skip the inner A frame
bushings for now and put it all back together.
Sure enough, the passenger side tire is cocked out at the top by several
inches.
Something is very seriously wrong here.
I need help diagnosing this situation, it's beyond me what's going on here.
Here are a few pictures I took and uploaded to picasa:
https://picasaweb.google.com/106121126121790278619/Bushingreplacefiasco
Rick (crap crap crap!!) Bastedo
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/corvallis at peoplepc.com
|