Steve,
Which cam did David at APT recommend for your engine?
John
Fogelsville, PA
--- On Thu, 7/14/11, Steven Guterman <an5.sprite@gmail.com> wrote:
From: Steven Guterman <an5.sprite@gmail.com>
Subject: Re: [Spridgets] Getting ready to pull engine and change cam
To: WeslakeMonza1330@aol.com
Cc: spridgets@autox.team.net
Date: Thursday, July 14, 2011, 9:26 AM
Thanks all for the input, I called the folks at APT, seem very
knowledgeable. I will likely go with a cam they build.
Steve
On Tue, Jul 12, 2011 at 3:30 PM, <WeslakeMonza1330@aol.com> wrote:
> **
> I wouldn't bother with the Kent 266 as it's too mild. The Kent 276 and
> Piper 270 are similar but the Kent might be ground to a higher standard.
> Since you're in the USA why not buy 'merican and give David Anton at
> www.aptfast.com a call as he grinds his own cams.
>
> Regards
>
> Weslake-Monza 1330
>
> In a message dated 12/07/2011 17:15:56 GMT Daylight Time,
> an5.sprite@gmail.com writes:
>
> Kent 266 or mp266
> Kent 276
> Piper 270
> Swift SW5-07
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/fastvee@yahoo.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|