Jim,
I can confirm that the hub nuts are different on both sides. One is left
hand the other right hand. It would also be logical for the driver side if
you are working on a US car to be LH.
Good luck.
Steve
On Fri, Sep 24, 2010 at 6:08 PM, Jim Fournier <jimndi@frontiernet.net>wrote:
> I'm trying to remove the Drivers side Rear Hub Nut on my 60 Bugeye. I've
> bent
> the locking plate out of the way but can not break the nut loose. Is the
> Hubnut on the drivers side a LH Thread??
> I Dont want to use a Hot Wrench on it because of the oil seal any
> advice???????????????????
> Thanks, j
>
>
> [demime found a multipart/alternative section which it tried
> to parse but could not find any section which it could render. Please send
> plain text.]
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage <http://www.team.net/forums%0AUnsubscribe/Manage>:
> http://autox.team.net/mailman/options/spridgets/an5.sprite@gmail.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|