Be sure he has staged injection of the NO2; I saw them lift the heads on a
Cadillac engine on a TV show by dumping the NO2 at too low an engine speed.
...bill in corvallis
=========================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Dave G.
Sent: Saturday, August 07, 2010 11:00 AM
To: spridgets@autox.team.net
Subject: Re: [Spridgets] electric cut out valve
My middle boy has installed a pair of these on his '68 Camaro.. they
work real well!
He took me for a drive down the main drag on a saturday afternoon and
twisted the knob on the dashboard.. Boy! do they get LOUD!!
He is building a 'sleeper' to go head-to-head with those Wannabe Honda
Racers.(he hates them with a passion) Big block Chev +FI +NO2 ...
About $13K in the motor so far...
His main problem at the moment is trying to keep the rubber sticking to
the road!!
--
Dave G. KK7SS
DN06ig
'65 Sprite - work in progress
'76 Midget - nearly ready
On 7 Aug 2010 at 9:31, corvallis@peoplepc.com wrote:
> Boys and their toys. Here is an electric cut out valve. .bill in
Corvallis\
> http://www.buickgn.com/electricexhaustcutout.htm
> _______________________________________________
_______________________________________________
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|