spridgets
[Top] [All Lists]

Re: [Spridgets] bugeye not starting

To: <spridgets@autox.team.net>
Subject: Re: [Spridgets] bugeye not starting
From: <corvallis@peoplepc.com>
Date: Mon, 24 May 2010 17:38:32 -0700
Double check that you've timed with #1 coming up and both valves are closed
on #1. Then double check that plug wires in the correct firing sequence in
the distributor cap. ...bill in corvallis
===================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Jess Power
Sent: Monday, May 24, 2010 5:09 PM
To: spridgets@autox.team.net
Subject: [Spridgets] bugeye not starting

Ok the dizzy was 180 degrees out.I have set the static timing and  
replaced the distributor.Carbs are getting fuel,backfiring some.The  
exhaust is not hooked up except for the manifold.There appears to be  
yellow fire coming out of the manifold where it would be attached to  
the exhaust pipe.I suppose it could be the coil or a carb problem.Any  
suggestions?
_______________________________________________
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>