Phil Nase wrote:
> The nut and tabbed washer look fine and so
> do the threads on the axle housing.
>
>
Phil
The tabbed washer should have a bend over tab on it to keep it in place.
OR the left hub has been replaced with a right hub.
The nut should be left hand thread so it does no "undo" when going forward.
If the hub was changed, or the left/right hubs switched at some time,
this will cause your problem.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|