Hi Joe,
Bleeders need to be at the TOP in order to get all the air out.
Gerard
On Dec 6, 2009, at 10:10 AM, spridgets-request@autox.team.net wrote:
>
> Message: 11
> Date: Sun, 6 Dec 2009 03:34:28 -0800 (PST)
> From: Joe Lansing <kidjoevid@yahoo.com>
> Subject: [Spridgets] Brake conversion problem
> To: Spridgets <spridgets@autox.team.net>
> Message-ID: <570268.97145.qm@web33203.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
>
> I have converted my 62 sprite to disk brakes up front. I also had a
> 3/4 bore master cyl. rebored/rebuilt and I put it in. I cannot get
> the system to bleed all the air off entirely. I get firm pedal
> after 3-4 strokes, but it won't hold. I have done each wheel cyl.
> 3-4 times.
>
> Is there a trick to doing the disk brakes? I thought I read
> somewhere that they were difficult. Did I install them wrong? The
> bleeders are at bottom...any ideas, help, resources?
>
> Joe - of the 3 Year Upgrade Project.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|