Michael Rowe wrote:
> Does anyone know of a diagram that show what all the connections in the
>hazard flasher switch are supposed to do. I have a good wiring diagram, but
>it does not show the insides of the multi-part switch.
>
> When the diagram shows a lot of black wires converging on a black dot (not a
>ground symbol), what does that mean?
>
> I lost my turn signals,
Michael
To get turn signals and by-pass the hazard switch, connect the 2 solid
green wires together.
I think they are the 2 on the bottom of the switch.
One of those green wires has a very small black band around it, not a
stripe but a band near the bullet end and near the spade end of the
hazard switch, this wire feeds the turn signals via the hazard switch,
bum switch, no signals.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|