JB weld to the rescue?? Damn!
Lester
On Jul 13, 2009, at 12:13 PM, fastvee wrote:
> Ron,
> You had luck riding with you that day! Still is tough to lose a
> beautiful
> crank like that one. The pic makes it look like the oil hole passes
> very close
> to the fillet radius, and is that the side the crack started from?
> Oil
> pressure mystery resolved!
> John
> Fogelsville, PA
>
> --- On Mon, 7/13/09, Ron Soave <soavero@yahoo.com> wrote:
>
> A little Scotchbrite, it'll be good as
> new. Seriously, after 4 years, the condition of those other journals
> is quite
> an example of Redline Oil's quality. The rods were ground .010 under
> in 2007
> (and #4 has been problematic ever since), but the mains are 4 years
> old and
> ended life at standard diameter without a mark on them.
> http://s459.photobucket.com/albums/qq317/soavero/Crank%20and%20WT_Too/
>
> Ron
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as oldsaabguy@comcast.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|