Ron,
>From bottom to top, it might be the fulcrum pin in the wishbone, the
kingpin bushings, or the trunion bushings. Someone else mentioned a
cracked wishbone, could be that at the fulcrum pin.
Take the drum back off and see if you can find any movement in the
suspension...
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
>From: Ron Soave [soavero@yahoo.com]
>Sent: 5/25/2009 2:54:08 AM
>To: spridgets@autox.team.net
>Subject: Re: [Spridgets] Culprit photos- Re: In a lurch
>
>I actually went to church and convinced my son to pray for the car. IT
never
>works at the racetrack either.
>
>I re-loaded, re-shimmed wheel bearings. I think I'm actually getting
passable at
>that procedure. Verified brakes are same material. Made sure pads were
centered.
>Dialed them in to the definition of "light drag". The more I dial in
the other
>stuff, the worse it seems to get. I have definitely isolated a 12
o'clock to 6
>o'clock rocking motion on the wheel, like a Dwight Gooden curveball
before he
>discovered crack. Is that kingpins or bearings/hubs?
>
>
>
>.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|