Well, that's not it then - the parts are in spec... Thanks for the info...
Peter Caldwell wrote:
> At 01:54 PM 5/19/2009, Marc wrote:
>> Could it be something as simple as the wrong TO bearing? By the looks
>> of this
>> http://www.aptfast.com/APT_Parts/Aseries_Parts/a_Clutch_Flywheel.htm
>> there are two different TO bearings, with the later version appearing
>> to be somewhat thinner. Hard to tell exactly from the pictures.
>>
>> I have two different clutch kits, both correct, however the TO
>> bearing from each of them resembles the part show for the 948.
>>
>> Anyone know definitively?
> ======================================
>
> Measuring from the center of the pivot pegs to the face of the carbon:
>
> 948cc 1/2"
> 1098 3/4"
> 1275 .970"
>
> Peter C. _______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|