If you look closely at the cap, I believe you will see a dimple in the side
of it. Try to use a 16 penny nail, and make that dimple a wee bit deeper,
then push it back on.
Brad
On Sat, May 16, 2009 at 2:12 PM, <CAWS52803@aol.com> wrote:
> Recently the little (1") cap/button popped off it's bracket. This is the
> dimmer switch that controls the high/low headlights on my Bugeye. I
> cleaned
> it up and pushed it back on, but because of the spring, it just pops back
> off. There is no apparent way to fastened it down. Even the Parts Manual
> doesn't show any method to secure the cap. And looking at the bracket,
> there
> is nothing that appears to be a switch to control the headlights. It is
> just
> a solid piece with the 3 wires connected to the underneath.
> Any guidance and/or explanation is greatly appreciated.
> Rudy Streng
> Lenoir, NC
> **************Recession-proof vacation ideas. Find free things to do in
> the U.S.
> (
>
>http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002
> )
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as tequila.brad@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
DON JULIO 1942
www.myspace.com/tequilabrad
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|