[Spridgets] Measurement Needed

["Mark" <mark@nashvilletn.org>]

Guys,

I need the measurement of the post on bonnet (hood) catch release the MK II
Sprite and MK I MG and up.  I don't have one here to look at, it is the same
hood catch release used on the MGB per the moss part numbers (406-015).  I
need the diameter of the post that the release cable attaches.  As I recall
from memory it is about 3/8 diameter.

Thanks,

Mark
Nashville
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets