Very carefully chamfer the edge of the bushing on the grinder and smooth
with a file??? Just a thought.
Martin Cooper wrote:
> Thank you to all whom responded. Problem can not get the bushing to
> center to push in - thoughts?
>
> ------------------------------------------------------------------------
> *From:* David Woerpel <dwoerpel@wi.net>
> *To:* spridgets@autox.team.net
> *Sent:* Saturday, April 11, 2009 12:28:46 PM
> *Subject:* Re: [Spridgets] Replacement of Bushings on the 1/4 Elliptic
> leaf spring
>
> Marty,
>
> Clean out the "eye' really well, wire brush or Dremel and then I coat
> everything with vaseline or a bit of oil (even been known to put the
> bushing in the freezer overnight...don't know if it really helped or
> not). I have a large 6" jawed vise and a socket that I used to press
> the bushing in. Worked very well. DO NOT APPLY HEAT TO THE SPRING EYE.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|