This was 1967 and I was young. If a little time in carb cleaner is good, a
long time is better. A few hours in my situation would have done. I left the
case half in there overnight.
Yes, I sense you could use a plastic container with the Evapo-rust product.
.bill
_____
From: Linda Grunthaner [mailto:grunthaner@gmail.com]
Sent: Saturday, March 21, 2009 6:07 AM
To: corvallis@peoplepc.com
Cc: spridgets@autox.team.net
Subject: Re: [Spridgets] Rust Removal...made simple.
Bill,
Why wouldn't I use a plastic container? Also what do you mean by "Don't
leave the block in there
too long as carb cleaner" is this carburetor cleaner? And how long is too
long?
Herb how long did you leave items with rubber parts in?
Thanks lin
----------------------------------------------------------------------------
-------------
On Sat, Mar 21, 2009 at 8:49 AM, <corvallis@peoplepc.com> wrote:
The trick to dipping a block is to make a metal box that is just big enough
to hold the block. I did this in the 1960's for half of a VW case. Had the
box made at a sheet metal shop; HVAC people. Don't leave the block in there
too long as carb cleaner, in my situation, etched the case at the fluid
line; I filled box to half full and flipped the case around when the lower
half was clean. ...bill in oregon
=============================================================
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|