FTF, While taking the rear of the Bugeye apart I found that the rear hub is
hitting the brake cylinder. I have later backing plates and dual piston
wheel cylinders. Do I just need to grind off the corner of the hub and
wheel stud? Is there something unique with the Bugeye rear axel when used
with late rear brakes? I have a few hubs and they all do the same thing.
It was 76 today, summer is on the way!
Mark
Nashville
http://www.arrestmered.com
58 "Bugeye"
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|