spridgets
[Top] [All Lists]

Re: [Spridgets] Need Carb - No LBC

To: "Billy Zoom" <billyzoom@billyzoom.com>, "derf" <derf247@gmail.com>,
Subject: Re: [Spridgets] Need Carb - No LBC
From: "David Riker" <davriker@nwi.net>
Date: Tue, 23 Dec 2008 18:58:54 -0800
Edelbrock makes a Performer Series Carb in a 500 cfm which should be ideal 
for stock small block Chevrolets.  My friend used one one his Rover engine 
and it was very well matched for that application.  It is less expensive 
however to buy a reconditioned 650 cfm Edelbrock from Summit Racing.

David R.

----- Original Message ----- 
From: "Billy Zoom" <billyzoom@billyzoom.com>
To: "derf" <derf247@gmail.com>; "David Lieb" <dbl@chicagolandmgclub.com>
Cc: "Spridget List" <spridgets@autox.team.net>
Sent: Tuesday, December 23, 2008 5:42 PM
Subject: Re: [Spridgets] Need Carb - No LBC


>>  new Edelbrocks that looks and works like
>> a Carter AFB.
> They ARE AFB's. They also have Weber cast into the side.
> They're good carbs, but it's hard to find one small enough. Goobers who 
> are
> into muscle cars like big numbers. I don't think Edelbrock makes anything
> smaller than 600cfm, and those are difficult to find. I went through this
> when I rebuilt the Ranchero. I settled on a NOS Carter 500cfm. That's more
> than enough for a 289 with a street cam.
> I think you can also find a plastic velocity stub stack for about $300.
> BZ
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>