I have a $3 radio shack piezo buzzer (more of a beeper) jumped across the
leads of the flasher unit in my glovebox - works great. And yes, I control
the volume with duct tape.
Steve
78 Midget
----- Original Message -----
From: "Frank Clarici" <spritenut@comcast.net>
To: "Michael Rowe" <mdrowe@optonline.net>
Cc: "Spridget Chat Group" <spridgets@autox.team.net>
Sent: Thursday, November 13, 2008 4:53 PM
Subject: Re: [Spridgets] Turn Signal Buzzer
> Michael Rowe wrote:
>> My turn-signal-off wings are tired and don't always work, so I thought I
>> would put a door buzzer in the circuit. The obvious place is at the
>> turn signal flasher unit, which is easily accessible. There is not
>> enough power to run both the flasher and the buzzer at the same time,
>> either in series or in parallel.
> I use radio shack cheapo buzzers. In fact we put one in the Holy Sprite.
> Bugeye signals do not cancel, and I know Father Jack would be riding
> around for days with a signal on.
> Last night he heard the buzzer but I wired it to the dash indicator lamp
> and it is taped to the steering column.
> If it's too loud, wrap a piece of tape around it.
>
>
> --
> Frank Clarici
> Toms River, NJ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|