I'LL TRY TO TAKE A PICTURE OF STOCK & MODIFIED FOR YOU LATER TODAY.
-----Original Message-----
From: spridgets-bounces+wsthompson=thicko.com@autox.team.net
[mailto:spridgets-bounces+wsthompson=thicko.com@autox.team.net] On Behalf Of
Matt Hagopian
Sent: Wednesday, September 10, 2008 10:32 AM
To: John Caffrey
Cc: spridgets Spridgets@autox.team. Net
Subject: Re: [Spridgets] tires
Guys, I just picked up this car 3 weeks ago and havent looked over it too
closely. I love bias tires, we run them on our XKE. I have a Panhard bar in
the rear.
"If the radius arm bracket is not done yet, it must be. Tire deflection
under cornering will cause it to hit the bracket bolt and tear the side out
of the tirer. Not a good thing." Im not in front of the car right now (wont
be until tomorow because its 2 hours away) is this a big job or is that
included in the 30 min a side?
On Wed, Sep 10, 2008 at 11:12 AM, John Caffrey <jdc6@lehigh.edu> wrote:
> Matt Hagopian wrote:
>
>> how do I do this? I might add.. right now the rear end is kind of loose.
>> So I should stay with the hoosiers?
>>
>> What do you mean by "The rear end is kind of loose"? I'm assuming you
> mean that you may not have a panhard bar? If you don't, you will have a
tire
> problem.
> John
> Fogelsville, PA
>
>
--
Sincerely,
Matt Hagopian
You are subscribed as wsthompson@thicko.com
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.19/1663 - Release Date: 9/9/2008
7:04 PM
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|