...right after you measure it and send the dimensions, right John??
--- On Tue, 9/2/08, Deikis, John G <John.Deikis@va.gov> wrote:
> From: Deikis, John G <John.Deikis@va.gov>
> Subject: [Spridgets] Speedi-Sleeve tool; WAS: Sprite-Midget Club
> To: "Jim Johnson" <bmwwxman@gmail.com>
> Cc: spridgets@autox.team.net
> Date: Tuesday, September 2, 2008, 4:57 PM
> My chapter has acquired the "Roger Heil Bumpy Axel Stub
> Repair Sleeve
> Installation Tool", also known as a Speedi-Sleeve
> driver for fixing
> buggered rear axel stubs so they don't leak, especially
> when installing
> the double-bearing rear hub upgrade. Why use a piece of
> tailpipe when a
> machined device (+/- .001" from spec) made from
> stainless steel billet
> will do the same thing?
>
> To borrow this tool, contact our Sprite-Midget Club
> (Western Washtenaw
> County Centre) president, Nigel Johnsfolly, to make
> amicable
> arrangements.
>
> This list, or a message to
> johnsfolly AT gmail.com
> will suffice for all official correspondence.
>
> Tool is more or less in the public domain, if you should
> need to use it.
>
>
>
>
> -----Original Message-----
> From: Jim Johnson [mailto:bmwwxman@gmail.com]
> Sent: Saturday, August 30, 2008 4:44 PM
> Cc: spridgets@autox.team.net
> Subject: Re: [Spridgets] Sprite-Midget Club
>
> A word about Sprite - Midget Club USA....
>
> ....Future plans include a special tool loan program....
>
>
> Cheers!!
> Jim - President
> 1st and Elm Chapter, Dodge City
> Sprite - Midget Club USA
> Formative web site: www.Sprite-MidgetClub.org
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as soavero@yahoo.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|