Well, I want directionals too.
Here is what I have working so far...
Brake lights that work with the brakes, and taillights when I throw the
switch.
Dash lights that work with the switch.
Gas gauge
Good solid ignition.
Tach inop, but that's for later.
Generator light always on, but regulator looks icky inside.
So we got that out of the way.
I know the bulbs are good, and if I apply power directly to these lamps,
they work.
Per Franks advice, I found the black wire on the passenger side and cleaned
the connection down to bare metal, but no change.
After reading my orange Reader (Bentley page 194) Lighting switch "6" has
more wires plugged into it than I have, specifically the LG and LGP ones. I
do not see these dangling around anywhere behind the dash.
Also, back in the engine/front end side, I matched up the colors, but I end
up with a black connector with nothing to plug into it. There is a blue one,
but black to blue does not seem like a logical choice.
Is there a chart somewhere to hit point to point to test things other than
the wiring diagram?
Chris
66MKIII
Brookfield, WI
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|