I bought a set of racing springs for the MKII a bunch of years ago, they don't
lower the rear end, however there are only 3 leaves to them. In order to use
the original length bolts, I fabricated a couple of Titanium spacers that are
~0.55" tall. I realized after making them that I could install them either
above or below the springs and either have a stock ride height or a lowered
one. That being said, the added drop on a MKII with wider wheels and
185/60-13s made the tires scrub the inner fender wells, even with the fender
lips ground off.
Obviously, that is not the case with a bugeye, so this might be applicable. If
you're interested in the pattern, email me off list and I'll see if I can find
one that I can send you in pdf format.
Mark Haynes
HAN6L12779
HAN5L8016
____________________________________________________________
Click for free info on online masters degrees and make up to $150K/ year
http://thirdpartyoffers.netzero.net/TGL2231/fc/Ioyw6ijmifr1XFuolFn6LCSSdprFqS
04qh9FzvrqmjpRDHqGOHrnDO/
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|