On Jul 30, 2008, at 6:53 PM, Glen Byrns wrote:
> Just a quick tip. If you submerge an entire rear spring in the
> rust bath, be
> sure to run a jumper wire to EACH leaf or you end up with a bundle
> of 5 rusty
> leaves with a nice clean one in the middle. By the time they're
> rusty enough
> for the rust bath treatment, there is NO conductivity between
> leaves. DOH!!!
Glen,
I wire brush a strip on both sides of the middle of the spring at the
center then wrap a length of copper wire around the middle of the
spring and attach the electrode to the wire.
If you wrap the wire tightly (twist with pliers) it will make contact
with all the leaves.
Kevin
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|