Here is a picture:
http://www.sjdiscounttools.com/rob10696.html
On Mon, Jul 14, 2008 at 8:21 PM, David Lieb <dbl@chicagolandmgclub.com> wrote:
>> Whitworth. ...really
>
> But if Whitworth sizes are by the length of one flat, what is the
> difference?
> As Bill L noted, I have a ratcheting wrench from LBCarCo, Part number K10696
> that has 3/16" and 1/4" on one end and 5/16" and 3/8" on the other end. I
> believe it was really developed for some HVAC application, but Jeff found
> them somewhere and stocks them for $13. MUCH easier to use than the
> non-ratcheting ones and FAR superior to trying to round off the flats with
> an open-end wrench.
> David Lieb
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|