How can you be sure the hubs are wrong? Often the number cast (like in the
hub) is 1 digit different from the part number used.
I thought a single rear hub was common across the BMC range with only stud
length varying.
Regard
W E S L A K E 1330
In a message dated 12/06/2008 23:01:59 GMT Daylight Time,
leavcast@infomagic.net writes:
While fixing a rear axle seal leak I discovered that I don't seem to have
the correct hubs. My parts book says I should have 2A7087 hubs and I have
2A7088 hubs. The profile appears wrong for the seals that I have.
Three questions:
Any problem with using the 2A7088 hubs on my sprite?
Who makes a good 2A7087 hub?
What was the 2A7088 used on?
George Castleberry
59 AN5
54 BN1
Flagstaff, AZ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|