Sometimes even longer.
Running an oil cooler? Fill the cooler, fill the lines, fill the oil filter.
Even fill the line going to the oil pressure gauge. They always seem to take
way longer than they should to build pressure (an I pack the pump with
Lubriplate assembly lube).
I only had one motor in about 20 that I've done fail to build pressure... we
swapped out the oil pump (it was new) and all was fine.
-----Original Message-----
From: spridgets-bounces+wsthompson=thicko.com@autox.team.net
[mailto:spridgets-bounces+wsthompson=thicko.com@autox.team.net] On Behalf Of
Frank Clarici
Sent: Sunday, March 23, 2008 6:48 PM
To: Brad Fornal
Cc: Spridgets; Yahoo Spridget list
Subject: Re: [Spridgets] Building oil pressure
Brad Fornal wrote:
> After turning it over for 2-3 seconds, it STILL isn't
> building pressure. What else am I missing here?
You need about 30-45 seconds of cranking to get some pressure.
--
Frank Clarici
Toms River, NJ
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|