I replaced the seals on my Midget this summer. For whatever it's worth I
made a j hook out of an old hose clamp to hold the clips. I also used a
flat screwdriver to just slightly pry the clips open before trying to
put them on. Once I figured out the system it took me about 30 minutes
per door to do the seals.
Robert
Frank Clarici wrote:
> Does anybody have a secret to installing the window waist seals and
> those &$@*ing clips?
> Yes I have a "J" hook which would work great if it was magnetic and not
> so curved.
> Is there a way to cut the glass in half so it's out of the way so I can
> get to the clips then glue the glass back?
> The window does not fit down the hole with the seals in place.
> The clips will not go on with the window in the hole.
> I really believe it is easier to cut off the outer door skin, install
> the window seal clips, weld up the door and repaint the car. It would
> save a lot of time.
> Maybe if I bought the "correct" clips instead of the clips sold for the
> seals from VB cause they don't fit the seal let alone the seal and the
> metal.
> Some mindless idiot had to do this at the factory, I wish I knew how he
> did it.
> Maybe I am trying too hard.
> How to's would be extremely welcome.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|