[Spridgets] 1275 in a Bugeye, question

[Peter C <peter@nosimport.com>]

Listerati,
        
        What have y'all done about the slave cylinder when installing a 
1275, or more specifically the transmission, in a Bugeye.

        The 67 on cars use a 1/4" pipe (adapted up from 3/16 at the master) 
that terminates at the flexible hose then goes into the 1" slave.
        The earlier cars use the 3/16 line solid into the 7/8" bore slave.

Options might include:
        1. Use the early slave cylinder
         2. use the 1275 slave and adapt from 3/16 to 1/4 at the hose
        3. use the 1275 slave and adapt at the master to the 1/4" line like 
the later cars.
        
Thanks
        Peter C
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets