Odd that you say that, as I just tossed a new mini maglight for the same
problem. I knew it was a lost cause, so I learned a little more about the
mag lights than I knew.
This is for the mini maglight, that uses the AA batteries
Remove the tail piece on the light, so you can see the battery. Take the
bulb cover/housing off. Remove the bulb. The black plastic bit, that is
spring loaded, is a snap in bit. Pop that out, and you can see the connector
that sits right above the batteries. Now, take a suitable drift, and with
your light held lightly in your vise, tap the connector bit, and the
batteries should pop out the bottom. Mine were so badly corroded, that I
actually sunk the drift INTO the battery, before the first one came out.
When the first one did emerge, it was "the coppertop". I was surprised, as
my wife usually get Energizers. I will have a talk with my purchasing
counterpart a work, as they buy Duracell in the 16 packs, for all our
battery needs at Brandom.
Brad
On Nov 9, 2007 1:20 AM, Bill Gilroy <wmgilroy@gmail.com> wrote:
> Last month I needed a flashlight so I grabbed the Maglight out of the
> toolbox and it did not work. So put that on the workbench and got the one
> upstairs and that failed to light up also. I know I replaced all the
> batteries in all my flashlights last December as that was when we were
> without power for 5 days. When I opened them up to replace the batteries
> I
> found the the batteries had corroded and were stuck in both Maglights. I
> was really annoyed since the batteries had only been in the flashlights
> for
> 9 months. I wrote a letter to Duracell and explained what happened. I
> about 10 days they sent me a check to cover the cost of 2 new Maglights
> and
> 2 coupons for 8 free batteries each. They stood by their product and I
> was
> happy in the end. It would have been better if they did not fail at all,
> but when it came time to purchase more AA batteries I purchased Duracells.
>
> -g
>
>
> On 11/8/07, Frank Clarici <spritenut@comcast.net> wrote:
> >
> > By 9;15 my last sawzall blade broke and I was on my 6th Gook Electric
> > light bulb, what's up with bulbs these days? I never moved the drop
> > light and went thru 6 bulbs in 4 hours! GE USED to bring good things to
> > light, now it's cheap chink made bulbs that last 5 minutes each.
> _______________________________________________
> tequila.brad@gmail.com
>
> Edit your replies
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
www.myspace.com/tequilabrad
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|