Clear plastic tubing can probably go 100 PSI.
Can you solder? If so just get something brass and solder it on the
ends of the metal tubing and use some 1/4 hose.
Or, you can coil up a few turns of copper tubing for a temporary fix.
I'll be home tomorrow night if you need any extreme engineering
(rigging?) done.
I was in Maurice last Sunday shooting Sporting Clays. I though about
dropping by so my friend could see your Bugeye. He has a nice 66
Sprite.
I think your engine is sound so if you REALLY must drive it you could
just plug the oil pressure line or cap the outlet and drive it
temporarily. I guess what I'm really getting at is if you rig
something up and it fails while your are out, a plug or crimp of some
kind can get you home.
Cheers,
Derf
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|