If you undo 1/2 the head nuts, you should undo all of them.
You do not have to remove the head but be sure to drain the coolant down
to below the head. Remove the top of the bottom hose and let it drain
down to the water pump snoot.
Undo the rocker nuts first then undo the head nuts starting from the
middle and working out. Loosen them a little at a time until all are
finger loose, then remove the side with the rockers, the other side can
stay on but if you do not loosen them you may warp or crack the head.
Tighten and torque from the middle out too.
--
Frank Clarici
Toms River, NJ
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|