Oh most learned ones,
I've been upgrading the brakes on my '62 to include not only the front discs,
but the dual line master cylinder form the '67 on Sprites. I've got the
proportioning valve and the lines, but am unsure as to which line goes where
on the master, and which go to the front brakes. There are 5 ports, two of
which are larger in thread size than the rest- these two go to the master. The
question comes from these two ports being opposed (across the piston) to one
another. Does the proportioning valve work side to side (rather than end to
end)? That makes no sense to me. Can anyone solve my dilemma?
Mark Haynes
'62 AN6L17792-without brakes!!!
_____________________________________________________________
Be your own boss today! Go to Technical School. Click here.
http://3rdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijngzTSxcPTde5XWon23B2IaIxC
sG7GbZSKHoDD19gM29uptS/
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|