I disconnected the tie rod ends from the steering levers. Both kingpin
assembly's swivel freely. They look pretty new, and there is no
discernible play. I can turn the steering wheel with one finger, but it
doesn't feel as free as I think it should. Pushing or pulling the tie
rod ends is difficult, it's very stiff. Shouldn't it move pretty
freely? it's just the rack and the steering wheel/shaft... On my B, I
can do that easily...
Marc
Frank Clarici wrote:
> Marc wrote:
>
>> Howdy -
>>
>> Just joined spridgets because a 73 RWA Midget has taken up residence
>> in my garage as of this week.
>
> Marc
>
> If the steering does not return, check the top nuts on the king pins.
> You mentioned they are new, I bet they are over tightened.
> There are shims that go under the trunion to give the pins a bit of
> clearance so you can steer the car.
>
> I put the jack stands on the rear spring mount in front of the rear
> wheels and on the front cross member.
> If the king pins are loose, the rack comes out pretty easy.
> Once the car is up, it should only take finger pressure to turn the
> steering wheel. Check those king pin nuts.
_______________________________________________
Edit your replies
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|