Most times you can just pull the line out from the carb side of the tank.
Usually there is a bob at the end of the fuel line in the tank. The
trick is to get a long piece of fuel hose and push it in through the
small hole and out the big hole(where you put gas in). Attach the bob
outside the tank and pull the line through. If there is a retainer
ring just line it up where it needs to go in relation to the bob and
use something long and thin to seat it as you pull the line out.
Once you master fuel line replacement then you can buy "broken" units
from Home Despots or Lowequality for half price and repair them
yourself. Learn to clean a carb float bowl and you can buy lawnmowers
and do likewise.
Cheers,
Derf
|