I was fortunate to find a gas cap off a forklift a few years ago. It
has a large ring like your keys are on. That slips into the tank neck,
and there is a chain that goes from it to the cap. No chance of losing
this one, though it could scratch the paint of you leave it hanging.
Brad
On 7/24/06, Dan Gillitzer <dang@ticon.net> wrote:
> Been here, done this w/my 62. The Mossy provided cap WILL work if you spread
> the 2 tabs a bit. A little slippery stuff on the rubber gasket such as
> vaseline will enable it to turn easier onto the neck. By comparing an original
> (or what I believe was original since there was no chrome or polishing done to
> it) the modern cap is good on the dimensions but the rubber gasket is probably
> too thick.
> Dan
--
www.myspace.com/tequilabrad
|