Joe,
A transverse engine ala Mini, doesn't have a "pan"; it has a transmission.
You could certainly cut your own pan gaskets. The material is probably a
god 1/16" and you will need an appropriate punch for the sump bolt
holes. You will also need gasket material for the front and rear sump
seals. If you still have the old ones, you can use them as a rough guide
for dimensions.
jay fishbein
wallingford, ct
http://home.ix.netcom.com/~type79/
Joe Lansing wrote:
>I'm wondering if the pan is
>different on the transverse mount 1275? I'll go
>through all my stuff again tonight, but If I can't
>find the right ones, what's the current wisdom on
>trying to cut your own?
|