OK folks,
Not "chuffed as arseholes" yet.
I've managed to separate the rear springs from the rear shackle (crow bar and
swearing).
However, do I need to remove the seats in order to get at the 2 bolts in the
front bracket?
(The front bracket is secured with 2 bolts going through the bracket and up
and, apparently, another 2 bolts coming down, through nuts welded on the
bracket.)
Also, 2 nuts on the U bolts are resisting. I put an iron pipe over a big 9/16
wrench and tried but I can feel the wrench bending! (I have Kobalt and
Craftsman wrenches - surely these won't break?) I've soaked the nuts as best I
can in PB Blaster.
Any thoughts?
Regards, Adrian
|