I used the Headliner adhesive with good results. Fit the vinyl in the
door first, then softly fold half of it back over it self. You can use
masking tape at to sides to act as a hinge. Spray the door and the
exposed back of the vinyl. After the glue sets up, smooth the vinyl in
place. Work from the center outward to keep it smooth. After that,
remove the tape and fold back the other half and repeat.
Dave
Dan Gillitzer wrote:
>Anybody have a good tip or two on getting good results for gluing the vinyl
>sheet into the door? I have a MK2, so it's the regular stuff, I don't know if
>the ribbed stuff used in the Bugeye is any easier or harder to do. Would like
>to avoid wrinkles. I'm thinking on using the same stuff I used to get the
>vinyl glued to the dash, which is a "headliner" adhesive, because I don't want
>it getting hot and peeling later on. I'm sure there is a technique involved
>somehow, but it's hard to even get it into a good position even whithout the
>glue!
>Dan
|