I think my vision would be a lengthened front end with a lengthened bugeye
bonnet, to give an e-type look to it. A little extra leg room would be nice
though.
And, no, I'm not going to attempt it. I've already got more to do than the
time and money that I have available, let alone 'ability'.
Robert D.
> Hey guys,
>
> C'mon, if you widened and lengthened a Midget, you would have an MGB......
>Inskip, the East Coast BMC Distributor, custom built 12 MGTD four-place
>tourers in the early 1950s by adding some length to the frame and making
>longer doors and filling in the rocker panel at the bottom. The same thing
>could be easily accomplished by using two old Spridget shells (I know of a
>solid shell in Simi Valley) and then one would only have to work on the doors
>- If ya really need more cylinders, a GM 3.4 V6 crate mill would probably fit
>into the stock hole.
> It might look a bit like a Dashoung (sp - A long German dog) but would give
>more room inside and ride smoother at the expense of some agility.
>
> Cheers,
> Rick Feibusch
|