Re: Sprite latches

Phil Nase wrote:
> My door latches won't close without a pretty good push while holding 
> down the lever on the latch.  

Original Bugeye door latches had shims. At least one on each side, 
sometimes (maybe) 2.
They are just thin metal which you can whip up with a drill and 
grindstone in a minute or 2. Trace the back side of the latch on a piece 
of 24 gauge aluminum or similar, cut and file to match the latch, drill 
2 holes.
A flatened out piece of coppper pipe works too.


-- 
Frank Clarici
Toms River, NJ