Hi,
Normally they fall apart before you have to remove them. But if that doesn't
happen you can generally bend them out very carefully. It helps sometime to
warm them up a little. If you are in the west leave them out in the sun at
noon and they will warm up nicely. Otherwise you can use a blow dryer and heat
it up that way. They will bend easier with heat. Too much heat will burn the
new window so don't over do it. I have a professional heat gun at work and you
must be careful not to burn the new Plexiglas with too much heat.
Cheers
Wrongway Ricky
60 Frog eye Puddles
Don't let the road get you down, get down on the road.
|