Hello Lester,
if you reach up kinda behind the a arm you should be able to
feel a lump, bump, hump in the casting.. if you take the
mounting plate and put it there you will find that there is
really only one place where the three bolt hole pattern will
fit properly... you can be off a little, but you'll get the
idea...when you reach up behind.. also, you stand a good chance
of weakening the arm if you don't put a back plate up inside
the arm for the bolts to go through... i made a pattern with a
piece of paper, then card stock, then 1/4" steel plate to fit
up in there... i have ONE spare metal one that i can send if you
need it...
--
Best regards,
Bill mailto:pythias@pacifier.com
"66 Sprite
|