Still in the car? If so, there is stamped into the alum housing just to one
side of center on a wider portion, the tooth count. Like 10/39 for a 3.9:1
or 9/38 for a 4.22:1 dif.
Scrape off the top with a wire brush and look at it with a mirror. That is,
unless you have a REALLY pointy head to squeeze up there! No comments,
please!
Out of the car, it's also stamped into the outer edge of the ring gear.
Paul A
----- Original Message -----
From "Love Charles M (Contractor)" <charles.m.love at us.army.mil>
To: <spridgets@Autox.Team.Net>
Sent: Monday, January 17, 2005 7:42 AM
Subject: Identifying Midget Rear-End Gear Ratios
> How do I identify the gear ratio on the Midget Rear End?
>
> Thanks,
> Monty Love
> '73 Midget, in pieces
|