John,
I don't know if you've read my previous discussions on this, but
these are nearly impossible to come by, and the primary piston MUST
have a perfect surface where it passes through the front seal or it
WILL leak.
I have rebuilt, brass sleeved units if you want an entire
replacement. Personally, I wouldn't install even a new unit without a
brass sleeve. If you have the primary piston but it has
scratches/gouges, I can recondition it for you.
Contact me offlist if you are interested.
>Anyone have a piston from a dual circuit master cylinder (67-78)? I
>can use just the secondary piston with no gouges, if available. I'm
>prepared to buy a new MC, but I'm convinced I can make a good
>rebuild with a serviceable piston.
>Thanks,
>John
--
One meets his destiny often in the road he takes to avoid it.
~French Proverb
http://www.gerardsgarage.com/FS_Garage.htm
|