RE: lock tab solution

I may have misled you.  The small main 1098's and 948's are the same, the
large main 1098's may be different I don't know.  The 1.75" and 2" is the
difference on the main bearings.
                Crash


Bolt pattern on my 948 flywheel is 1.75 in and the 1098 is 2.0 in. Go 
figure. So I went with the locktite solution. Thanks again to all for the 
feed back.

Check out the new British Cars Forum:
http://www.team.net/the-local/tiki-view_forum.php?forumId=8