Bill,
As I recall, the bulb holder is a spring loaded (tangs around the
perimeter) press fit into the metal bezel. But that should be obvious
to you if that's what you have. Maybe the bulb holder was changed.
You could always run a ground wire from the holder to ground if that
is the case.
Gerard
>
>
>
>
>What I don't know is how the original indicator setup is supposed to
>look and work. How does the bulb socket fit into the indicator lens and
>get to ground? Anybody have a picture? This is the single indicator
>light between the speedo and tach.
>
--
One meets his destiny often in the road he takes to avoid it.
~French Proverb
http://www.gerardsgarage.com/FS_Garage.htm
|